Applying the magnet on a French door Samsung

Bottom drawer can be a bit tricky 

here is the guide on how to do it correctly 

🛠️ How to Make a Handle Hole for This Type of Fridge

1. Remove the Handle First:
   Carefully unscrew or unclip the handle from the fridge. Most of these handles are attached with hidden screws (usually under or behind the handle ends). Use a screwdriver and keep the screws safe for reattaching later.

2. Apply the Magnet in Place:
   Gently place the magnet on the door, making sure it's straight and aligned the way you want it. Do not press it down hard yet.

3. Mark the Hole Location with a Removable Marker:
   Use a removable marker (like a dry-erase or washable marker) to trace around the recessed base area where the handle attaches. This gives you the exact area you’ll need to cut.

4. Remove the Magnet and Cut the Notch:
   Take off the magnet and place it on a clean surface. Use sharp scissors or a craft knife to carefully cut the marked area.
   ✂️ Tip: Make the cutout slightly bigger than the traced area, especially if your handle has curved corners or a tight fit.

5. Reapply the Magnet and Reattach the Handle:
   Once the hole is cut, press the magnet back on the fridge door, aligning it perfectly. Then reattach the handle with the original screws.

6. Final Touch:
   Wipe off any leftover marker with a damp cloth.